[PT0004] 3x JST-PH Parallel charging cable
Details:
3x JST-PH Parallel charging cable
For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector.
This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board.
On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time.
You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it.
For those new to parallel charging, you can google/you tube information on it, but in summary:
You can only connect 2S Lipo to this cable
Mixing 300mAh, 330mAh, 360mAh together is ok
The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough.
All empty is fine, ~30%, ~40%, ~50% mix together is fine.
Ideally charger capacity set to total mAh of the packs
Charger current can scale up according to total capacity of the packs
Below is a good video guide:
https://www.youtube.com/watch?v=WY194Md6KNg
[ORI30341] Ladegerät Advantage ONE1X6A (EU) 80W AC/DC LiPo1-6S/NiMh1-15N
Das Advantage ONE 1X6A von Team Orion ist ein sehr einfach zu bedienendes Ladegerät, das eine enorme Ladeleistung zu einem erschwinglichen Preis bietet. Es lädt LiPo/LiFe/LiHv-Akkus bis 6S und Nimh mit einer einstellbaren Laderate zwischen 0,1 und 10A
Das Advantage ONE 1X6A Ladegerät in wenigen Worten Das Advantage ONE 1X6A ist ein Hochleistungs-AC-Ladegerät der Einstiegsklasse, das zum Laden von LiPo-Akkus von 1S bis 6S, NIMH-Akkus von 1 bis 15 Zellen und PB-Akkus von 2 bis 20V verwendet werden kann. Der Ladestrom ist wählbar von 0,1 bis 10A bei einer maximalen Ladeleistung von 80 Watt. Der Advantage ONE 1X6A kann fast jede Art von Batteriechemie aufladen; Li-Fe, Li-Ion, Li-Po, Li-HV, Ni-MH, Ni-Cd und PB. Das LCD-Display liefert alle Informationen, die zum Navigieren durch die verschiedenen Programme benötigt werden. Das Advantage ONE 1X6A verfügt über mehrere großartige Funktionen, die nur in High-End-Batterieladegeräten zu finden sind.
Advantage ONE 1X6A-Ladegerät verfügt über Bis zu 6S- Zellausgleichsanschluss Hochwertiges 2 x 16-Zoll-LCD-Display mit Hintergrundbeleuchtung Lüfter Kann Li-Ion/Li-Po/Li-HV- und Li-Fe-Akkus von 1 bis 6S laden Kann Ni-MH-Akkus laden von 1 bis 15 Zellen (1,2 V - 18 V) Kann PB-Batterien von 1 bis 10 Zellen (2 V - 20 V) laden Verschiedene Lade-, Entlade- und Lagerprogramme Kann den Innenwiderstand Ihrer Batterie messen Kann die Spannung jeder Zelle während des Ladevorgangs messen und überwachen Laden Mit allen notwendigen Sicherheitsfeatures: Kurzschlussschutz, Verpolungsschutz, etc. Vielseitiges Ladegerät für LiPo/ LiFe bis 6S und Nimh bis 18 V. 80 Watt Leistung
Batterietyp: Lebensdauer/ LiIon/ LiPo HV/ LiPo/ NiMH/ Bleisäure
Zellenzahl LiPo: 1-6S
Ladeleistung: 80W
Ladestrom: 6A
Steckertyp: Bec/ Krokodilklemmen/ Deans/ Futuba
Entladeleistung: 10W
Entladungsrate: 2A
Eingang: 230V / DC 12-15V
Integrierter Balancer: Ja
Modi: Aufladen
Erhaltungsladung: Ja
Typ: Wechselstrom/Gleichstrom
Benutzeroberfläche: LCD-Display/Tasten
EAN: 7612888303413
Gewicht: 312 g
Breite: 125 mm
Länge: 132 mm
Höhe: 55 mm
Instruction Manual English (ORI30340_EN.pdf, 128 Kb) [Herunterladen]
Instruction Manual Deutsch (ORI30340_DE.pdf, 120 Kb) [Herunterladen]
Instruction Manual Français (ORI30340_FR.pdf, 119 Kb) [Herunterladen]
Warning-Warnung-Avertissement (211203_Chargers_Safety.pdf, 224 Kb) [Herunterladen]