GLR 1/27 RWD LM CHASSIS-W/O RX

Der GLR ist ein Fahrzeug mit Heck-Antrieb (RWD)

RWD ist das Chassis-Format, das von On-Road-RC-Autos seit Jahren bevorzugt wird. Der Vorteil des "RWD" auf glatten, griffigen Oberflächen kann nicht unterschätzt werden.
Niedriger Schwerpunkt und geringes Gewicht hat entscheidende Vorteile.
Fans lieben auch die Einfachheit dieser Art, einfach einzurichten, einfach zu warten.

Gemäß der Traditionen von GL-Racing ist der GLR in Grundausstattung konkurrenzfähig, mit Optionsteilen für weitere Anpassungen und Einstellungsänderungen natürlich wettbewerbsfähig.

Produktinformationen "GLR 1/27 RWD LM CHASSIS-W/O RX"

[GLR-LM-KSET] GLR 1/27 RWD LM CHASSIS-W/O RX

Der GLR-LM-KSET ist der Klassiker aus dem Hause GL-Racing. Der Bausatz beinhaltet alle notwendigen Teile für den Grundaufbau.
Für Fahrspaß muss noch die Empfangseinheit, der Motor, der Akku und die Karosserie inkl. Radset erworben werden. Der GLR kann neben den klassischen Mini-Z Karosserien auch auf Lexan-Karosserien umgerüstet werden.

Radstand: 102mm

1 von 1 Bewertungen

Bewerten Sie dieses Produkt!

Teilen Sie Ihre Erfahrungen mit anderen Kunden.

Anmelden

Ihre E-Mail-Adresse

Ihr Passwort

Sortiert nach

16. September 2019 17:33

Super Chassis

Fahre das Chassis jetzt im zweiten Jahr ohne Mängel. Qualität stimmt einfach.

GL-Racing | GLR-001-LM-NES | Chassis | GLR-LM 1/27 RWD Chassis - (W/O RX,ESC)

Dieser Bausatz beinhaltet:

GLR Chassis - Bausatz
GL-Racing Geschwindigkeitsregler (ESC)
GL-Racing Servo

weiterhin wird benötigt:

Sender
Empfänger
GBY003 LiPo Pack 7.4 / 2S / GL-Racing
15mm Brushless Motor (GL- und PN-Motoren)
Karosserie inkl. Radset
LiPo Ladegerät
Montagewerkzeuge und Zubehör

This kit includes:

GLR Chassis - Bausatz
GL-Racing esc
Gl-Racing Servo

Items you will need to run:

Transmitter
Receiver
GBY003 Lipo Pack 7.4 / 2S / GL-Racing
15mm Brushless Motor (GL- und PN-Motoren)
Body incl. wheelset
LiPo Charger
Assembly tools and accesories

Der Aufbau des GLR ist in der PDF Dokumenation (download) leicht verständlich beschrieben.
Auch für Neu-Einsteiger im "Modellbau" ist die Montage und die Inbetriebnahme ohne große Vorkenntnisse erfolgreich auszuführen.

Farben können abweichen!

Bilder zeigen mögliche Ausbaustufen des Chassis.

Bitte den Ausbauzustand und das im Set enthaltene Zubehör der Beschreibung entnehmen!

Weiterführende Links zum Artikel " GLR 1/27 RWD LM CHASSIS-W/O RX "

Fragen zum Artikel

Montage-Anleitung

Accessory Items

2.4GHz Kyosho-FHSS Rx Unit to KT-531P / KT432-PT

[GP0003KT] 2.4GHz Kyosho-FHSS Rx Unit to KT-531P / KT432-PT

49,00 €*

2.4GHz ASF-H Rx Unit

[GP0003P] 2.4GHz ASF-H Rx Unit Paering / Anmelden der Fernsteuerung an GL- Racer mit 2.4GHz ASF-H Rx Unit: -> Fernsteuerung - Taste " 1 “ nach oben gedrückt halten und KT-18 mit Taste “ 2 “ einschalten. Nach ca. 3 Sekunden Taste " 1 “ loslassen. Sender zeigt durch schnelles Blinken LED " 3 " Paering-Bereitschaft an. Fernsteuerung anlassen!!! -> GL - Racer - mit gedrückter Paering-Taste (befindet sich auf der 2.4GHz ASF-H Rx Unit ) einschalten.Nach ca. 5 Sekunden Paering-Taste loslassen. GL- Racer ausschalten dann KT-18 ausschalten! Start: Erst KT-18 einschalten, dann GL- Racer einschalten. geschafft... nun Race!!!

49,00 €*

3x JST-PH Parallel charging cable

[PT0004] 3x JST-PH Parallel charging cable Details: 3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time. You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it. For those new to parallel charging, you can google/you tube information on it, but in summary: You can only connect 2S Lipo to this cable Mixing 300mAh, 330mAh, 360mAh together is ok The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough. All empty is fine, ~30%, ~40%, ~50% mix together is fine. Ideally charger capacity set to total mAh of the packs Charger current can scale up according to total capacity of the packs Below is a good video guide: https://www.youtube.com/watch?v=WY194Md6KNg

6,99 €*

Kyosho | K.96505 | SILIKONFETT | Ersatzteile | Modellbau

SILIKONFETT #30000CPS (15G)

[K.96505] SILIKONFETT #30000CPS (15G) GRAISSE SILICONE #30000

12,90 €*

GLR Carbon Side Damper Mount for Lexan Body

[GLR-016] GLR Carbon Side Damper Mount for Lexan Body Details: To be used with GLA-035, Carbon reinforced bumper w/ body post set

5,99 €*

GLA Carbon reinforced bumper w/ body post set (Lexan Body)

[GLA-035] GLA Carbon reinforced bumper w/ body post set (Lexan Body) Details: Important: this item was originally designed for GLA, to use it with GLR, please also get a GLR Carbon Side Damper Mount for Lexan Body. For GLA and GLA-V2

11,90 €*

Sensored brushless motor 5500KV(1pc)

[GMM-002-SD5500KV] Sensored brushless motor 5500KV(1pc) Details: GL Sensored Brushless Motor

48,99 €*

Sensored Brushless motor 3500KV(1pc)

[GMM-002-SD3500KV] Sensored brushless motor 3500KV(1pc) Details: GL Sensored Brushless Motor

48,99 €*

Lipo Pack / 7.4V / 2S / GL Racing / 360mAh / 45C Discharge

[GBY003] Lipo Pack / 7.4V / 2S / GL Racing / 360mAh / 45C Discharge Lipo Akku passend GLA, GLR, GLF, GLD und GL-Rider Chassis

16,80 €*

2S 330mAh LiHV hardcase battery

[GL-LiHV330] 2S 330mAh LiHV hardcase battery GL is going to release our Hard Case LiHV Battery for mini scale chassis. It is compatible to our GL own designed battery connector which can be plugged into the battery “directly” as if you are using the pin plugs. At the same time it can support pin plugs if you prefer to use pin plugs. No matter which of the above mentioned plugs you are using, you are able to enjoy the benefits of this Hard Case Battery:1. Battery producers usually making “extra” length of wire in order to suit all chassis but this makes wires are jumping up in the chassis due to they are too long. Now you can tailor made the length of wires coming out from your car’s ESC to perfectly match each of your car setting & chassis. Side benefit is reduced weight as less redundant wires.2. The battery is able to sit into the car chassis properly without intervention by wires coming out from the battery.3. With the above mentioned 2 benefits, you will find your wires are more tidily placed inside the chassis which have added advantage to the car stability.4. It is a high voltage battery that supports charging up to 8.6 voltage and gives you more power.5. More durable indeed as the battery is protected by the hard case.6. Battery size:43x20x13mm

19,90 €*

Details

CR-20 with cable (50mm)

[BC-002] CR-20 with cable (50mm)

7,90 €*

Details

CR-20 with cable (50mm) Kopie

[BC-003] Male plug with cable (70mm)

4,90 €*

Details

1.5mm GL power plug (3pcs)

[BC-004] 1.5mm GL power plug (3pcs)

3,90 €*

Details

T-FHSS Futaba Receiver

[RX-055] Futaba 2.4GHz T-FHSS Rx Receiver Details: Description: This is the first Futaba T-FHSS compatible micro surface receiver in the world. It offers full 4-channel support in ultra-light weight and micro size. It is ideal for micro racing cars. Features: 1. Futaba 2.4GHz T-FHSS compatible 2. High performance CPU enhance precision control feeling 3. 4 channel support 4. Micro size (19mm x12mm) 5. Ideal for any micro rc racing chassis 6. Added failsafe function 7. Operating Voltage 3.7V - 8.4V: 8. Weight: 2g Compatible Transmitters: Futaba 7PX 4PX 7XC 4GRS 4PV 4PM 4PLS Transmitter Two-way High Speed Receiver Package Included: 1 x Receiver Procedure: Each transmitter has an individually assigned, unique ID code. In order to start operation, the receiver must be linked with the ID code of the transmitter with which it is being paired. Once the link is made the ID code is stored in the receiver and no further linking is necessary unless the receiver is to be used with another transmitter. 1-Place the transmitter and the receiver close to each other within half (0.5) meter. 2-Place the transmitter into the linking mode and turn on the receiver 3-During countdown, push the receiver tact switch for approximately 2 seconds. The LED will begin to blink red. After the receiver LED switches from blinking red to green - red steady light, If the transmitter and receiver are linked normally, set the power switch to the OFF position and then turn on the PWR ON position. If the receiver LED lights green, linking was succeeded. Actually check servo operation. Normal mode / High Speed mode: The " Normal mode " accepts any type of servos or the peripheral. The "High Speed mode" only accepts the digital servos, including BLS series, and most peripheral equipments such as the brushless ESCs. Please pay special attention to the information contained within this manual and transmitters manual in order to have a pleasant running experience.

49,90 €*

Details

1/28 P1M LEXAN BODY(102mm WB)

[GBL001-P1M-102] 1/28 P1M LEXAN BODY(102mm WB) Details: GL Racing worked with one of the leading Lexan shell manufacturer BLITZ Bodyshell to bring you the 1/27 P1M. Based on Blitz P1, we worked with Blitz to produce something closer to real car dimensions with longer bonnet and longer tail than their 1/12 offering. Wheelbase is 98mm, body width is just under 80mm fitting in with current lexan shells on the market to maximize performance while staying under 80mm for most racing rules. Testing showed that this shell has great driving characteristics, higher top speed, high speed stability as well as nimble rotation through slower corners. Comes readily with Windows Masks and Stickers, too! Specification:- Width: 80mm Length: 168mm Height 41mm (with Wing)

16,50 €*

Werkzeug Set Mini-RC Racer

[TOL0CS01] Werkzeug Set Mini-RC Racer Besonders genaue Größe für Mini-RC Racer Reduzieren Sie das Risiko einer Beschädigung des Schraubenkopfs. Der Schraubendreher aus dünnwandigem Innensechskant kann auf kleinem Raum eingesetzt werdenBewegliche Rolling Cap] erleichtern die Drehung durch Drücken. Verhindert effektiv das unerwartete Scrollen Farben erleichtern Sie die Suche des benötigten Werkzeuges.

28,40 €*

GL-Racing | RX-BOX-SW |Receiver case (For Model: DSK-116)

Receiver case Sanwa (For Model: DSK-116)

[RX-BOX-SW] Receiver case (For Model: DSK-116) passend : Empfänger für DSK116 (Sanwa)

5,90 €*